SICK WLL80 Analog - Page 16

•
The output current (100mA) per sensor is identical for all digital outputs.
•
PNP/NPN residual voltage ≤1.8V
•
Dielectric strength max 30V
•
Output impedance 10 Ω
NOTE
When using sensors in bus mode, the output current per sensor is reduced as follows:
•
From 2 sensors = max. 20mA
6 ELECTRICAL INSTALLATION
16
O P E R A T I N G I N S T R U C T I O N S | WLL80 Analog 8027947 /2022-12-14 | SICK
Subject to change without notice