3 Intended use
The WLL80 fiber-optic sensor is an opto-electronic sensor which – in combination with fibers – is used for optical,
non-contact detection of objects.
A fiber-optic sensor is designed for mounting and may only be operated according to its intended function. For this
reason, the fiber-optic sensor is not equipped with direct safety devices.
The system designer must provide measures to ensure the safety of persons and systems in accordance with the
legal guidelines.
SICK AG assumes no liability for losses or damage arising from the use of the product, either directly or indirectly.
This applies in particular to use of the product that does not conform to its intended purpose and is not described
in this documentation.
If the product is used for any other purpose or modified in any way, any warranty claim against SICK AG shall
become void.
INTENDED USE 3
8027947 /2022-12-14 | SICK O P E R A T I N G I N S T R U C T I O N S | WLL80 Analog
7
Subject to change without notice
To Next Page
Loading...
