2 Safety information
■
Read these operating instructions before commissioning the device.
■
Connection, mounting and configuration of the device must only be carried out by qualified personnel.
■
This device does not constitute a safety component as defined in the Machinery Directive.
■
Do not install the sensor in places exposed to direct UV radiation (sunlight) or other weather conditions
unless this is expressly permitted in the operating instructions.
■
When commissioning the device, ensure adequate protection against moisture and contamination.
■
These operating instructions contain information required during the life cycle of the photoelectric sensor.
2 SAFETY INFORMATION
6
O P E R A T I N G I N S T R U C T I O N S | WLL80 Analog 8027947 /2022-12-14 | SICK
Subject to change without notice