sidhil SOLITE-PRO - 9.3 Operating the Side Rails (When Fitted); 9.4 Electrical Operation

28
9.4 Electrical Operation
The bed is supplied with an easy to use handset. The handset may be operated by the
occupant or carer. If the carer is to operate the bed ensure that the occupant is made
aware of the action(s) about to take place.
Holding down of the relevant button causes the desired function to operate, releasing
the button causes the operation to terminate and all movement to stop.
9.3 Operating the Side Rails (When Fitted)
To lower the integral side rails:
1. Lift one end of the top side rail upwards.
2. Depress the release latch at the raised end
of the side rail whilst holding the side rail up.
3. Gently lower the side rail until fully down at
one end. The release latch can be released
after the side rail has begun to lower.
4. Repeat the process at the opposite end of
the bed.
This information refers to the operation of Solite Pro integral full length side rails. For
details of how to operate a different type of side rail, refer to your side rail instructions
for use.
To raise the integral side rails:
1. Lift the upper side rail until it is heard to latch into position at the top height at both
ends of the bed.
Caution
Warning
9.3.1 Lowering the side rails
1. Lift
side rail
2. Press
latch
• Ensure the side rails are locked in place at all times when in the raised position
to prevent injury or entrapment.
• When raising / lowering the side rails ensure they are free from limbs, to
prevent injury or entrapment.
• Do not use the side rails to move the bed – Side rail / bed frame could be
damaged.
• Do not use the side rails as a positioning or lifting aid – Side rail and / or bed
frame could be damaged.
• When lowering, do not drop the side rail - Side rail and / or bed frame could be
damaged.