12
Last update: 03.2014
KFVkeyless
Operating instructions
5 App
We recommend using the app for simple and quick adjustment of the settings and for managing users. This
app can also be used to perform user-specific settings.
The KFVkeyless app is compatible from iPhone version 4S upwards. For mobile phones with Android operat-
ing systems, Bluetooth-Standard Version 4.0 low energy support is required. Up to 6 doors can be adminis-
tered via app.
Important information:
1. You and your Smartphone must be within the range of the KFVkeyless for the administration of the
KFVkeyless and its users via app.
2. KFVkeyless remains in programming mode from the last keystroke on the keyboard or in the app.
3. As long as there is a connection between the app and KFVkeyless, set to programming mode, the door
can be opened via the menu item "Open door".
4. Access to KFVkeyless via the app on KFVkeyless cannot be gained from several devices simultaneously.
5.1 Setting up App – 1. Introduction
To use the app for KFVkeyless, you must first set it up as described below:
1. Load the purchased app into your Smartphone. The app is available under the name "KFVkeyless" for
iPhones and Android Smartphones in the relevant Appstore.
2. Switch on Bluetooth on your mobile phone.
3. Start the app. (a license check is carried out with Android, an Internet connection is required for this.)
4. Click the "Setup" button.
5. Enter your chosen password (max. 15 digits) and confirm.
6. You can now use the app to manage the module and the users. (see following chapter)
5.2 Setting up a door in app
This module must be set up as a door in the app in order to manage KFVkeyless and its users.
The necessary steps are described in detail in the table below.
Note: It is not essential to teach in your mobile phone as described in chapter 3.2.1, to set up a door in the
app with your Smartphone. This can also be done in the course of the "Set up a door" function via
the app.
However, for iPhones, we recommend that you first teach in the mobile phone in accordance with
chapter 3.2.1.
To Next Page
Loading...