Motor Description
1.5 Technical data
1)
With absolute value encoder (due to the max. temperature of the encoder)
2)
Power connector and terminal box mutually exclude one another
3)
Motor with terminal boxes, max. cross-section that can be connected, refer to the Table
"Connections for terminal boxes"
ends on the size of the
selected power module (refer to the Configuration Manual, Drive Converters)
5)
Motor with terminal boxes, power and signals cables, refer to Catalog, Chapter
"Connection system MOTION-CONNECT”
6FX5002 = MOTION-CONNECT 500;
TION-CONNECT”
7)
Cables can be supplied in integer lengths of precisely 1 meter;
Length code, refer to the Configuration Manual "General Part for Synchronous Motors"
8)
For 1FT613 motors, the maximum current and the rated current of the converter must be
carefully observed.
1FT616 motors can only be operated with SIMOVERT MASTERDRIVES MC drive
converters.
4)
The electrical shock hazard protection of the power cables dep
6)
6FX8002 = MOTION-CONNECT 800;
Technical data, refer to Catalog, Chapter “Connection system MO
1FT6 synchronous motors
Configuration Manual, (PFT6), Edition 12.2004, 6SN1197-0AD12-0BP0
1-9
To Next Page
Loading...
