Motor Description
1.7 Cooling
Note
Different anti-corrosion agents should not be mixed.
Table 1-11 Manufacturers of chemical additives
Company Address Telephone/URL
Tyforop Chemie GmbH Hellbrookstr. 5a,
D–22305 Hamburg
URL: www.tyfo.de
Joh.A. Beckiser Bergstr. 17
D-40699 Erkrath
Phone: 02104 / 40075
CINCINNATI CIMCOOL
Cincinnati Milacron b. v./
Cimcool Division
Postfach 98
NL–3031 AB Vlaardingen
Phone: 003110 / 4600660
Fuchs Petrolub AG Friesenheimer Strasse 17
D-68169 Mannheim
Phone: 0621 / 3802–0
URL: www.fuchs–oil.com
Hebro Chemie GmbH Rostocker Straße
D-41199 Mönchengladbach
Phone: 02166 / 6009–0
URL: www.hebro–chemie.de
Fa. Hoechst Refer to the Internet address URL: www.hoechst.com
Houghton Lubricor GmbH Werkstrasse 26
D-52076 Aachen
Phone: 02408 / 14060
Schilling–Chemie GmbH u.
Produktions KG
Steinbeißstr. 20
D-71691 Freiberg
Phone: 07141 / 7030
Note
These recommendations involve third-party products which we know to be basically suitable.
It goes without saying that similar products from other manufacturers can also be used. Our
recommendations should be considered as such. We cannot accept any liability for the
quality and properties/features of third-party products.
Wassertechnik GmbH
Cooling-medium intake temperature
The intake temperatures should be selected so that no moisture condensation forms on the
surface of the motor: T
cool
≤ T
ambient
–2° C
The motors are designed for operation up to a cooling medium temperature of +30°C, but
still maintaining all of the specified motor data. The continuous torque changes for other
intake temperatures.
1FT6 synchronous motors
Configuration Manual, (PFT6), Edition 12.2004, 6SN1197-0AD12-0BP0
1-25
To Next Page
Loading...
