Need help?Do you have a question about the Siemens 3TK2810-1 and is the answer not in the manual?
General| Type of voltage | AC/DC |
|---|---|
| Stop category | 0 |
| Contact material | Silver alloy |
| Switching current | 6 A |
| Protection class | IP20 |
| Design of the product | Safety relay |
| Supply voltage | 24 V |
| SIL according to IEC 61508 | SIL 3 |
| Performance level according to EN ISO 13849-1 | e |
| Category according to EN ISO 13849-1 | 4 |
| Ambient temperature during operation | -25 ... 60 °C |
| Type | Safety relay |
| Rated operational voltage | 24 V |
| Mechanical life | 10, 000, 000 operations |
| Electrical life | 100, 000 operations at rated load |
| Operating temperature range | -25 to +60 °C |
| Mounting | DIN rail |
| Type of electrical connection | Screw connection |
Safety info, ESD, intended use, dormant error detection, initiator notes.
Summarizes key features, application, and basic versions.
Details supply, measuring inputs, outputs, and signaling outputs.
Guides on commissioning, parameterization using display, and menus.
How to read settings and an overview of troubleshooting steps.
Table of errors, diagnosis, responses, and behavior during faults.
Instructions for replacing a device and parameterizing the new unit.
Lists protection class, temperature, EMC, PL, and suitability.
To Next Page