Operation
6.2 Parameterizing/configuring
3TK2810-1 safety-related speed monitor
44 System Manual, 01/2011, 926246402000 DS 02
Parameterization
Initiator settings
Initiator type
pnp
npn
Resolution E1
xxxxx [pulses/rev. or mm]
Resolution E2
xxxxx [pulses/rev. or mm]
1.6
ESC OK
Speed limits
Automatic max.
xxxxx [rpm or m/min]
Automatic min.
xxxxx [rpm or m/min]
Setting max.
xxxxx [rpm or m/min]
Setting min.
xxxxx [rpm or m/min]
Standstill
xxxxx [rpm or m/min]
1.7
ESC OK
Times
Start override
xx.x [s]
Release delay
xxx.x [s]
Switch-off monitoring
xxx.x [s]
1.8
ESC OK
Start type
Manual start
Automatic start
1.9
ESC OK
Protective door monitoring
Simultaneity on
Simultaneity off
1.10
ESC OK
1)
If this setting is changed, points 1.4, 1.5 and 1.7 are reset to the default values.
To Next Page
Loading...
