Siemens 4010 - Advanced Connectivity and Troubleshooting; Connecting to a PABX

76
Press keys:
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
anlagen.fm
11.6.01
Connecting the base station to
a PABX
Dialling mode and flash time
Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling
(
DTMF
d
ual
-
t
one
m
ulti
f
requency).
Please refer to the operating
instructions for your PABX
.
Options:
– Tone dialling (DTMF)
–
D
ial
p
ulsing (DP)
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Base Settin
g
s

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Add. Features

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Diallin
g
Mode

Select the menu item and confirm.

Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite:
your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
PABX
.
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Base Settin
g
s

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Add. Features

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

TBR

Select the menu item and confirm.

Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.

The appropriate settin g is marked with a
'
.