Siemens 4010 - Saving the Prefix (APL); Switching Temporarily to Tone Dialling

77
Press keys:
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
anlagen.fm
11.6.01
Saving the prefix (APL)
Prerequisite:
It is necessary for your PABX to enter a
prefix, such as “0”, before the telephone numbers for
external calls.
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Base Settin
g
s

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Add. Features

Select the menu item and confirm.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Access Code

Select the menu item and confirm.
e.g.

[
Enter or change the prefix (up to 3 digits).
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Save Entry

Save the setting.
Switching temporarily to tone dialling
If your PABX still operates with dial pulsing (DP) but
tone dialling (DTMF) is required (for example to checky-
our mailbox) you must switch to tone dialling (DTMF)
during the call.
Prerequisite:
You are conducting a call!
A
Open the menu.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Temp. Tone

Tone dialling is active.

O
When storing numbers in the directory (see
page 21) you must enter the prefix.
For example:
0
089 123456.
O
The
prefix
that you store here is always inser-
ted and dialled automatically before the tele-
phone numbers in the caller list and the
emergency numbers.
O
No prefixes must be entered for SMS service
Centre numbers.

Only if your PABX is connected to the
analogue
fixed network
will your Gigaset's mailbox fea-
tures be active.