Remote operation
7.1 Operating via SIMATIC PDM
SITRANS LR250 with mA/HART
74 Operating Instructions, 10/2019, A5E32220602-AG
Step 1 – Identification
The layout of the dialog boxes shown may vary according to the resolution setting for
your computer monitor.
SITRANS PDM limits the TAG field to a maximum of 24 characters.
1. Click on Read Data from Device to upload Quick Start parameter settings from the device
to the PC/PG and ensure PDM is synchronized with the device.
2. If required, change the language for the local user interface.
3. Click on NEXT to accept the default values. (Description, Message, and Installation Date
fields can be left blank.)
Step 2 – Application
Select the application type (level or volume) and the material, then click on NEXT.
See Application with Stillpipe (Page 66) for a Low Dielectric Liquid application.
To Next Page
Loading...
