861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11 61/214
Installation
21 Switchgear installation
Fig. 39: Busbar version up to 3150 A
The points the panels are interconnected at are called panel joints hereafter.
Precondition: The panels are standing in the switchgear room and are aligned for assembly
(see page 59, "Aligning the switchgear").
Principle: Repeat the following operations for all panels until final assembly.
WARNING
Risk of injury due to inappropriate installation.
The activities described below must be performed professionally in order to minimize the
risk of injury.
➭ The switchgear must be assembled by certified personnel only
(see page 10, "Qualified personnel").
①
Panel joint
②
Fixed-mounted panel
③
Panel to be lined up
To Next Page
Loading...
Need help?
General
