9410 series Logging
Harm Mean Log Harm High Log
V1 THD mean I1 K Fac mean V1 THD high I1 K Fac high
V2 THD mean I2 K Fac mean V2 THD high I2 K Fac high
V3 THD mean I3 K Fac mean V3 THD high I3 K Fac high
I1 THD mean I1 THD high
I2 THD mean I2 THD high
I3 THD mean I3 THD high
Energy/Demand log
The Energy/Demand log records energy and demand data used by energy
management software to generate reports. Changing the logged data can prevent the
generation of reports that use this data.
Sag/swell log
The Sag/swell Log provides details of power quality events. By default, it logs the
following values:
SS1 DistDur SS1 DistV1Min SS1 DistV1Max SS1 DistV1Avg
SS1 DistV1Engy SS1 DistV2Min SS1 DistV2Max SS1 DistV2Avg
SS1 DistV2Engy SS1 DistV3Min SS1 DistV3Max SS1 DistV3Avg
SS1 DistV3Engy SS1 DistNominal SS1 Swell Lim SS1 Sag Lim
EN50160 compliance logs
The EN50160 compliance logs are used to record EN50160 compliance parameters:
Data recorder EN50160 component
logged
Data recorder EN50160 component
logged
EN50160 Frq/Mg
Power frequency and
supply magnitude
EN50160 PrmHrm1
Parameter data
(disabled by default)
EN50160 Hrm Vlt Harmonics EN50160 PrmHrm2
EN50160 Intrp Short/log interruptions EN50160 Vlt Dp1
Supply voltage dips
EN50160 Ovrvlt1
Temporary overvoltage
EN50160 Vlt Dp2
EN50160 Ovrvlt2 EN50160 Vlt Dp3
EN50160 Prm-f/V
Parameter data
(disabled by default)
EN50160 Vlt Dp4
EN50160 Prm-VIr EN50160 Vlt Dp5
EN50160 Vunbal Voltage unbalance
The meter logs EN50160 counter data for present and previous observation periods as
well as EN51060 events.
See the EN50160 2010 compliance and ION meters technical note, available from
www.usa.siemens.com/pds, for more information about your meter’s EN50160
compliance.
104 7EN05-0336-01
To Next Page
Loading...
