Siemens 9410RC - EMC (Electromagnetic Compatibility); Safety; Ethernet Communications

Specifications 9410 series
LEDs
Energy pulsing LEDs (visible and infrared) located on top of meter
Type Visible orange, infrared
Wavelength 600 – 609 nm (orange) 825 – 925 nm (infrared)
Maximum pulse rate 42 – 69 Hz (based on line frequency)
EMC (electromagnetic compatibility)
Product standards IEC 62052-11
IEC 61326-1
Immunity to electrostatic discharge IEC 61000-4-2
Immunity to radiated fields IEC 61000-4-3
Immunity to fast transients IEC 61000-4-4
Immunity to surges IEC 61000-4-5
Immunity to conducted disturbances IEC 61000-4-6
Immunity to voltage dips and
interruptions
IEC 61000-4-11
Immunity to magnetic fields IEC 61000-4-8
Immunity to ring waves IEC 61000-4-12
Immunity to conducted disturbances, 2 -
150 kHz
CLC/TR 50579
Radiated and conducted emissions FCC part 15 Class B, EN55011, EN55022 Class B, ICES-003 Class B
Surge withstand capacity (SWC) ANSI C37.90.1
Mechanical compliance
Vibration IEC 60068-2-6
Shock IEC 60068-2-27
Safety
Safety construction IEC/EN 61010-1 ed.3, CAT III, 400 VLN / 690 V LL
UL 61010-1 ed.3 and CSA-C22.2 No. 61010-1 ed.3, CATIII, 347 V LN /
600 V LL
IEC/EN 62052-11, Protective Class II
Ethernet communications
Number of ports 2 (the second connector functions as an Ethernet switch for networking devices)
Maximum cable length 100 m (328 ft), per TIA/EIA 568-5-A
Cable type CAT5/5e UTP (use unshielded connector only)
7EN05-0336-01 167