Communications 9410 series
NOTE: The number of events or maximum time delay settings only apply to enterprise
SNMP traps.
See the ION Reference, available from www.usa.siemens.com/pds, for detailed
information on the SNMP Mapping, SNMP Options and Alarm Options modules.
Related Topics
• Configuring SNMP using ION Setup
• Configuring SNMP using your meter’s webpages
Default SNMP mapping
Enabling SNMP provides SNMP access to the meter values linked to the SNMP
Mapping module.
You can configure the SNMP Mapping module to link to different meter values. By
default, the following meter values are linked to the SNMP Mapping module:
I a kVAR tot Vll ca Vln avg Ib mean kW sd mx del-
rec
I b kVA tot Vll avg Freq Ic mx kW sd del
I c PF sign tot Vln a Ia mx Ic mean kW sd rec
I avg Vll ab Vln b Ia mean kW sd mx del kW sd del-rec
kW tot Vll bc Vln c Ib mx kW sd mx rec kVAR sd mx
del
kVAR sd mx
rec
kVAR sd mx
del-rec
kVAR sd del kVAR sd rec kVAR sd del-
rec
kVA sd mx del
kVA sd mx rec kVA sd mx del-
rec
kVA sd del kVA sd rec kVA sd del-rec kWh del
kWh rec kWh del-rec kVARh del kVARh rec kVARh del-rec kVAh del
kVAh rec kVAh del-rec
The following meter information is always provided by default and cannot be
configured:
Voltsmode Model number
Serial number Device name
Firmware version MIB version
If you change your meter’s default values you must modify the custom MIB file to
reflect the new values.
Changing your meter’s default SNMP configuration assumes that you have an
advanced understanding of ION architecture, SNMP, and the communications network
and power system that your meter is connected to.
See the ION Reference, available from www.usa.siemens.com/pds, for detailed
information on the SNMP Mapping module.
Configuring your SNMP MIB file
You must configure your MIB file if you have modified the default SNMP information
provided by the meter in order for the MIB file labels to reflect the modified values.
Download the ION MIB file from www.usa.siemens.com/pds.
7EN05-0336-01 69
To Next Page
Loading...
