Siemens AG SPR2-320.814.02.01.02 ARCADIS Orbic
01.05 CS SD 24
Actions 13
Page 13 of 46
Medical Solutions
3-
2Actions
Covers 0
• Proceed as follows after the ARCADIS Orbic 3D has been moved to the respective
room and the brake has been enabled.
Cover of the X-ray unit 0
• Remove the cover and reattach it after installing the 3D option.
Horizontal carriage cover 0
• Remove the cover and connector M3.X1.
• Reattach the cover after installing the 3D option.
Cable module cover 0
• Remove the cover and dispose of it properly, because this cover will no longer be re-
quired.
• Attach the new cover after installing the 3D option.
To Next Page
Loading...
