EasyManuals Logo

Siemens ARCADIS Orbic Installation And Startup

Siemens ARCADIS Orbic
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 General
ARCADIS Orbic SPR2-320.814.02.01.02 Siemens AG
01.05 CS SD 24
Page 8 of 46
Medical Solutions
WARNING
Risk of injury on mechanical parts!
If these guidelines are not observed, minor to moderate injury, es-
pecially to the hands, can occur.
¹ The C-arm of the system is manufactured from a carbon
fiber composite material (CFK). In the case of damage to
the carbon fiber structure, for example caused by a colli-
sion or by cutting or scraping tools, individual carbon
fibers or carbon fiber bundles can protrude and cause
injury to the skin or can penetrate the tissue of the hand.
¹ Before starting work on the C-arm, make sure that the
carbon fiber structures are undamaged (visual inspec-
tion).
¹ If smaller superficial damage is detectable in the painted
area or in the area of the running surface edges of the
C-arm, wear work gloves and remove any projecting car-
bon fibers. Then carefully rub the damaged places flat
with a fine emery cloth and seal the damaged surface
with paint. A spray paint the color of the C-arm can be
used for this purpose (see Service Tool Catalog).
¹ Remove any carbon fibers lying in the C-arm profile with
a damp sponge or cloth.
¹ If greater damage to the carbon fiber structure indicating
persistent or large-scale destruction of the carbon fiber
structure (e.g. crack formation or flaked off places in the
running surfaces with torn carbon fibers) can be
detected, replace the C-arm.
CAUTION
Electrostatic voltage!
Noncompliance can lead to property damage.
¹ ESD protection guidelines must be observed when per-
forming service.
CAUTION
Risk of being burned by hot parts or components!
Noncompliance can lead to minor or moderate burns, especially
on the hands.
¹ Removing the covers exposes parts or components (e.g.
power components, heat sinks, solenoid brakes) which
may exhibit temperatures of > 50° Celsius when in opera-
tion. To prevent burns, switch off the system power sup-
ply before contacting any parts or components and let
the system cool off for at least 5 minutes before resum-
ing work.

Other manuals for Siemens ARCADIS Orbic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens ARCADIS Orbic and is the answer not in the manual?

Siemens ARCADIS Orbic Specifications

General IconGeneral
BrandSiemens
ModelARCADIS Orbic
CategoryMedical Equipment
LanguageEnglish

Related product manuals