Siemens CP 443-1 User Manual

12 Technical Specifications
B4A−76
CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A
Release 01/2007
C79000-G8976-C193-06
12 Technical Specifications
Table 6-1 Technical Specifications
Transmission rate 10 Mbps and 100 Mbps
Note:
To operate with PROFINET IO and PROFINET CBA, the
transmission rate of 100 Mbps full duplex is an absolute
necessity.
Interfaces
Attachment to Industrial Ethernet 4 RJ-45 jacks
Aging time (4-port switch) 5 minutes
C-PLUG (memory submodule) Number of write cycles: approx. 100 000
Current consumption via the S7
backplane bus
from 5 V: 1.8 A maximum
Current consumption for battery
backed RAM file system (/sram) from
battery of power supply module
0.018 mA typical
0.063 mA maximum
Power loss 7.25 W
Permitted ambient conditions
S Operating temperature
S Transportation/storage
temperature
S Relative humidity max.
S Altitude
0 °C to +60 °C
−40 °C to +70 °C
95% at +25 °C
up to 2000 m above sea level
Design
Dimensions, module in casing H x W
x D (mm)
290 x 25 x 210
Weight approx. 700 g
In addition to the specifications listed here, the ”General Technical Specifications”
listed in the reference manual S7-400/M7-400 “Module Data” /1/ apply to the CP
443-1 Advanced.
S Electromagnetic compatibility
S Transportation and storage conditions
S Mechanical and climatic ambient conditions
S Insulation tests, class of protection and degree of protection

Siemens CP 443-1 Specifications

General

Brand	Siemens
Model	CP 443-1
Category	Computer Hardware
Language	English