206_58300000141095_ara_en_k.doc – 04.10.a Seite 29 von 113
3.7 Cooking sensor
This function is only found in 150 mm or 180 mm rear with turrets
which measure the infrared rays emitted by the recipient.
The turrets are located on the rear ends. There is a recess in the
metal plate to put the turrets into.
On the lower part, the covers can be seen, fastened with two screws.
To dismount it, we must release the lower cover, take off the glass
and take it out from underneath.
3.7.1 Components
3.7.1.1 Infrared turrets
The turret comes as a single component. The external ring is red in
colour (except in the trademark thermador, which is blue).
This infrared sensor measures the temperature of the recipient.
If the red light does not work the complete component must be
changed.
Check the connections first.
To activate this function the turret must be taken out manually.
To Next Page
Loading...
