206_58300000141095_ara_en_k.doc – 04.10.a Seite 51 von 113
4 FAULT DIAGNOSTICS
4.1 Mistakes and Service-Program
Mistake codes and service programs are described in own document.
You can find the documents als electric diagram (ASP) in Quickfinder.
Contents are for example
Mistakes Codes and warnings
Service-Program
– Demo mode
– Basic settings access /exit
– Service- program access / exit
Service-Program functions
– Basic settings functions
– Service program functions
4.1.1 Before a repair
Warning!
Always before changing a module, it must be checked that all the hob
connections are correct and that there does not exist any weak or free
cable.
To Next Page
Loading...
