Interface Modules
8-15
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Technical Specifications
Dimensions and Weight
Dimensions
W H D (mm) 45 x 119.5 x 75
Weight Approx. 150 g
Data for Specific Modules
Transmission rate 9.6, 19.2, 45.45, 93.75,
187.5, 500 kbps
1.5, 12 Mbps
Bus protocol PROFIBUS-DP
Interface Fiber-optic cable
SYNC capability Yes
FREEZE capability Yes
Manufacturer ID 806B
H
Direct communication Yes
Clocking No
Voltages, Currents, Potentials
Rated supply voltage of
the electronic
components (1L+)
1)
24 VDC
Reverse polarity
protection
Yes
Power failure
bypass
Min. 20 ms
Isolation
Between the
backplane bus and
electronic
components
No
Between the supply
voltage and
electronic
components
No
Current consumption
from rated supply
voltage (1L+)
Approx. 200 mA
Power supply for the
ET 200S backplane
bus
Max. 700 mA
Power dissipation of the
module
Typ. 3.3 W
Status, Interrupts, Diagnostics
Interrupts None
Diagnostic function Yes
Group error
PROFIBUS-DP bus
monitoring
Red “SF” LED
Red “BF” LED
Monitoring of the
power supply
voltage of the
electronics
Green “ON” LED
1)
Fusing the supply voltage:
– Fuse type: 24 V/2.5 A /type C
– Inrush current: 3.5 A
To Next Page
Loading...
