4 IQ-SENSE
13-14
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
How it Works: Specifying a Sensitivity/Distance Value
(IntelliTeach)
Normal operation
(valid sensitivity/
distance value)
Specify a sensitivity/distance
value (1 to 126)
on bit 1 to bit 7 in PIQ
Transfer the sensitivity/di-
stance value to the sensor at
the rising edge
on bit 0 in PIQ
Figure 13-6 How it Works: Specifying a Sensitivity/Distance Value (IntelliTeach)
To Next Page
Loading...
