6.11 Detector tester for linear smoke detector RE10
● For undertaking a performance check on the
linear smoke detector
● Compatible with:
– Linear smoke detector FDL241-9
● Order number: BPZ:3685190001
6.12 Alarm test filter TF04
● Alarm test filter for detector tester for linear
smoke detector RE10
● Absorption: 77%
● Dimensions: Approx. 170x85mm
● Compatible with:
– Linear smoke detector FDL241‑9
– Detector tester for linear smoke detector
RE10
– Adjustment kit FDLU291
● Order number: BPZ:4931090001
6.13 M20x1.5 metal cable gland
● For introducing a cable into a housing
● For cable diameters of 3.5…5.5mm
● Temperature range: -40…+100°C
● Allows for increased IP protection
● Compatible with:
– M20x1.5 metal counter nut
– Housing FDMH231-S-R
– Housing FDMH292-x
– Housing FDMH293-x
– Housing FDMH297-R
– Housing FDCH221
– Manual call point FDM243H
– Air sampling smoke detection kit FDBZ290
– Base deep (wall mounting) FDB227‑x
● Order number: A5Q00004478
Details for ordering
Detector tester for linear smoke detector RE10
6
A6V10332811_e_en_-- 43 | 44