Siemens FDL241-9 - Installing the Detector Unit

4.2 Installing the detector unit
WARNING
Danger of falling
Bodily injury
● When installing, use a secured ladder or work platform.
w The carrier for connection terminals is mounted in the detector base.
1.
Insert the detector unit(1) into the base (2) along with the carrier for the
connection terminals with the LED pointing downwards.
2.
Fasten the detector unit with four screws(3). Ensure that the screws are
tightened.
1
2
3
Figure 18: Installing the detector unit
1 Detector unit 3 Screws
2 Detector base with carrier for
connection terminals
Commissioning
Installing the detector unit
4
A6V10332811_e_en_-- 23 | 44