Siemens Flender H2NV Series - Combined Splash and Forced Lubrication by Means of an Attached Oil Pump

21 / 62
BA 5060 EN 04/2011
5.4 Combined splash and forced lubrication by means of an attached oil pump
The rolling bearings and gear stages are supplied with oil by means of splash and forced lubrication. The
outputshaft rolling bearing arranged at the bottom is greaselubricated.
The oilsupply system is part of the commission and comprises:
• a flangedon or motor pump
• a coarse filter
• a pressuremonitoring device
• pipework
1
3
2
Fig. 6: Gearunit fitted with flangedon pump
1 Flangedon pump 2 Pressure monitor 3 Coarse filter
(incorporated in the gear unit)
A detailed view of the gear unit can be obtained from the drawings in the gearunit documentation.