60 / 62
BA 5060 EN 04/2011
12. Declarations
12.1 Declaration of incorporation
Declaration of incorporation
in accordance with Directive 2006/42/EC, Annex II 1 B
The manufacturer, Siemens Industriegetriebe GmbH, 09322 Penig, Germany, declares with regard to the
partly completed machinery
Cooling-tower gear unit
H2NV
Sizes 105 to 112
for driving an air-cooling installation for power stations:
‐ The special technical documents described in Annex VII B have been prepared.
‐ The following basic health and safety requirements set out in Directive 2006/42/EC, Annex I,
are applied and are satisfied:
1.1, 1.1.2, 1.1.3, 1.1.5; 1.2.6; 1.3.1 ‐ 1.3.4, 1.3.6 ‐ 1.3.8.1; 1.4.1, 1.4.2.1;
1.5.1, 1.5.2, 1.5.4 ‐ 1.5.11, 1.5.13; 1.6.1, 1.6.2; 1.7.1 ‐ 1.7.2, 1.7.4 - 1.7.4.3
‐ The partly completed machinery is in conformity with the provisions of the Directive(s):
94/9/EC
‐ The manufacturer undertakes, in response to a reasoned request by the national authorities,
to transmit in electronic form relevant information about the partly completed machinery.
‐ The person authorised to compile the relevant technical documentation is:
Friedheim Schreier (Director Engineering SGU)
Penig, 2011‐04‐20
Friedheim Schreier (Director Engineering SGU)
Penig, 2011‐04‐20
Michael Kupke (Director Business Subsegment SGU)
To Next Page
Loading...