123
Web configurator – Setting the phone using a PC
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010
Version 8, 03.09.2008
Configuring the VoIP connection
¤ Open the following Web page: Settings ¢ Telep hony ¢ Connections.
¤ Select the Edit button next to the VoIP connection that you want to configure or
the configuration you wish to change.
This will open a Web page where you can make the settings that your phone needs
to access your provider's VoIP server.
The Web page always displays the following areas:
u IP Connection (£ Page 123)
u Auto Configuration (£ Page 124)
u Personal Provider Data (£ Page 126)
The areas
u General Provider Data (£ Page 127) and
u Network (£ Page 128)
can be shown and hidden by selecting the Show Advanced Settings and Hide
Advanced Settings buttons.
You must enter the VoIP provider's general access data in these areas.
You can download this data for many VoIP providers from the Internet
(
£ "Area: Auto Configuration", Page 124).
¤ Make the settings on the Web page.
¤ Save them in the phone £Page 130.
¤ Activate the connection if necessary £ Page 130.
Area: IP Connection
Connection Name or Number
Enter a name for the VoIP connection or the VoIP phone number (max. 16 charac-
ters). This name is used to display the connection on the handset and the Web con-
figurator interface, e.g. when allocating send and receive numbers (
£ Page 137),
for the call display (
£ Page 44).
To Next Page
Loading...
