Siemens Hicom 300 H - Page 32

Step by Step
Administration
32
Click softkey.
No phone restart is needed to implement the changes.
Virtual LAN
The screen prompts for the virtual LAN identifier in case
the phone is within such a network environment.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "Layer 2/3 settings".
Select "Virtual LAN".
Enter Virtual LAN identifier (Text input see  page 41).
Click softkey.
No phone restart is needed to implement a change to
this field.
SNMP settings
This screen allows to manage and configure data asso-
ciated with the use of SNMP.
SNMP Trap IP Address
The SNMP trap IP address is the IP address of the
SNMP manager, the phone reports any restarts to that
location.
SNMP Password
The SNMP password is required to gain access to
SNMP functions. In the as-supplied condition, the
SNMP password is public.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "SNMP settings".
Save
3
1
1
3
2
A B C
Save
3
1
1
4
All manuals and user guides at all-guides.com