Siemens Hicom 300 H - Page 33

Administration
33
Step by Step
Make the desired entries or changes (Text input see
 page 41).
Click softkey.
LAN port settings
This screen allows to set the speed of the LAN port.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "Network settings".
Select "Direct LAN access".
Select "LAN port settings".
Select an entry corresponding to the LAN.
The available options are:
Auto
10 Mbit/full
10 Mbit/half
100 Mbit/full
100 Mbit/half
Click softkey.
LDAP server settings
This form allows the administrator to define the infor-
mation required by the Corporate directory application
to access a remote LDAP server.
Enter the Administration menu. Access  page 17.
Select "Configuration".
Select "System settings".
Select "LDAP server settings".
Enter IP address or host name and Port number
(Text input see  page 41).
o Enter a port number in the range 0 to 65535.
If no value is specified, the default port number of 389
is assumed
Click softkey.
A B C
Save
3
1
1
5
Save
3
2
1
A B C
Save
All manuals and user guides at all-guides.com