Siemens LMV27.100x2 - 24 Info Level; Display of Info Level

133/219
Building Technologies Basic Documentation LMV27... CC1P7541en
24 Info level 17.12.2018
24 Info level
24.1 Display of info level
/
reset
1…3 s
Press
/
reset
until InFo appears.
When releasing
/
reset
, you are on the info level.
The info level displays information about the LMV27 and about operation in general.

Note
On the info level, you can press or to display the next or the previous parameter.
Instead of pressing , you can also press
/
reset
for <1 second.

Note
Press or
/
reset
for >8 seconds to return to the normal display.

P
Vh
min s %
Bild 27e/0807
Parameter
Parameter value
Figure 79: Info level
Note!
No change of values on the info level!
If the display shows .
_
.
_
below the parameter value,
the value may consist of more than 5 digits.
The value is displayed by pressing
/
reset
for >1 s and <3
s.
Press
/
reset
for >3 s or press
ESC
to return to the
selection of the parameter number (parameter no.
flashes).
No. Parameter
Info level
167 Fuel volume resettable (m³, l, ft³, gal)
162 Operating hours resettable
164 Startups resettable
163 LMV27 operating hours with power applied
166 Total number of startups
113 Burner identification
107 Software version
108 Software variant
102 Identification date
103 Identification number
104 Parameter set preassignment: Customer code
105 Parameter set preassignment: Version
143 Reserved
End