Siemens LMV27.100x2 - Display of Info Values (Examples); Identification Date; Identification Number

134/219
Building Technologies Basic Documentation LMV27... CC1P7541en
24 Info level 17.12.2018
24.2 Display of info values (examples)
24.2.1 Identification date
The identification date described below corresponds to the creation date for the program
sequence and cannot be changed by the user.
P
V
h
mi n
s%
Bild 29/0707
The display shows parameter 102: flashing on the
left, characters ._._ on the right.
Example: 102: ._._
/
reset
/
reset
1…3 s
P
Vh
mi n
s%
Bild 30/0707
Pressing the button
/
reset
(1…3 seconds) and
releasing it when ._._ flashes displays the
identification date (creation date of the program
sequence) DD.MM.YY.
Example: Identification date 03.11.05
/
reset
or
ESC
P
V
h
mi n
s%
Bild 29/0707
Press the
/
reset
or button to return to the
display of parameters.
To the next parameter
24.2.2 Identification number
P
V
h
min
s%
Bild 31/0707
The display shows parameter 103: flashing on the
left, identification number 0 on the right.
Example: 103: 0
To the next parameter
or
/
reset
<1 s
Back to the previous
parameter.