Siemens LMV27.100x2 - 26.5 Use of parameter level

147/219
Building Technologies Basic Documentation LMV27... CC1P7541en
26 Parameter level 17.12.2018
26.5 Use of parameter level
The parameters stored in the LMV27 can be displayed and changed on the parameter
level.
Normally, all parameters have been set by the burner manufacturer – with the exception
of those for the fuel train and for air-fuel ratio control.
A description of parameter level 400, which is used for setting the fuel train and the fuel-
air ratio curve, is given in chapter Fuel / air ratio curves – settings and commissioning.
V
SD
AF
>1 s
Press button combination
to display
000: Int.

With , select the parameter group 100:
PArA.
With
, select the parameter group 200:
PArA.

Pressing the
/
reset
button takes you to
parameter 201: Burner operating mode.