Siemens LMV27.100x2 - 26.10.1 Using the example of parameter 701: Errors

155/219
Building Technologies Basic Documentation LMV27... CC1P7541en
26 Parameter level 17.12.2018
26.10 Parameters with index, with no direct display
26.10.1 Using the example of parameter 701: Errors
Refer to chapter Error code list!

Note
Can be deleted for service, refer to chapter Parameter list!
P
Vhmins%
Bild 84/0707
HIStory 700: for error history.
/
reset
Press
/
reset
to go to the
parameter level.
P
Vhmins%
Bild 85/0707
Press
to select parameter 701.
Display: Parameter 701. flashes, index 01: and value
201 do not.
/
reset
P
Vhmins%
Bild 86/0707
Press
/
reset
to go to index 01:.
Display: Parameter 701. does not flash, index 01:
flashes, value 201 does not.
To the next index
Back to the previous
index
P
Vhmins%
Bild 87/0707
Press
to select the index:
.01 = error code
.02 = diagnostic code
.03 = error class
.04 = error phase
.05 = startup counter
.06 = output
Example:
Parameter 701., index 05: for startup counter, diagnostic
code
._._