Siemens MAMMOMAT Balance - Subassemblies and PCB Replacement Guide

Subassemblies and PCB replacement
MAMMOMAT Balance SPB7-115.840.01 Page 9 of 62 Siemens AG
Troubleshooting Guide Rev.02 10.04 Medical Solutions
Subassemblies and PCB replacement
When replacing subassemblies and/or PCB, take care of calibration or Firmware version according
the following table :
SIEM.code MTL code Part description Calibration Firmware
08883402 DS/INVC132 Display SP14N003 power supply NO NO
08883410 DS/LMG7401 SP14N003 DISPLAY NO NO
08883436 KTFLA0206 INVERTER module
Note (1)
NO
08883444 KTFLI0009 H.V. Transformer
Note (1)
NO
08883451 PCB/01-170-X CPU Board NO
YES
08883469 PCB/02-171-0 TUBE Temperature sensor NO NO
08883477 PCB/02-179-X C-ARM Service board NO
YES
08883485 PCB/03-181-X CPU Keyboard NO
YES
08883493 PCB/03-186-X Service board NO
YES
08883501 PCB/03-187-X Serial port connectors board NO NO
08883519 PCB/03-188-X CPU Mother board
YES YES
08883527 PCB/92-073-X Filament power supply
YES
NO
08883535 PCB/92-074-X Anode starter
YES YES
08883543 PCB/92-083-X Keyboard NO NO
08883550 PHTM9000 AEC Detector
YES
NO
Note (1)
kV check and eventual adjustment is necessary.