Gas spring replacement
MAMMOMAT Balance SPB7-115.840.01 Page 58 of 62 Siemens AG
Troubleshooting Guide Rev.02 10.04 Medical Solutions
Gas spring replacement
Gas spring assembly is made of two gas springs 08896479 + 08896487 with a jacket 08884293
When gas spring becomes defective MW7 Sensing microswitch opens and specific alarm is
generated at control panel.
To replace gas spring assembly :
1. Switch OFF the unit and turning manually flywheel of carriage motor, move carriage till to align
arrows as shown in the next image
2. remove fixing ring from the shaft
RING
To Next Page
Loading...
