Appendix C - MD-P1D with Visual Display
The MD-P1D Power Meter features a backlit digital display. It has two rows of 16
characters that auto cycle between informational screens every two to three seconds,
with real-time values updated every second.
MODE SELECTION: The meter display may be toggled between the Auto Cycle
mode (default) or Manual Cycle and Hold mode by pushing/holding the meter display
button for > five seconds. This mode change is saved to non-volatile memory in case
of power loss.
AUTO CYCLE: The display will auto cycle between flowchart screens every two
seconds. Pushing the meter display button > five seconds will temporarily hold the
current screen until either the display button is pushed again, or until a 20-second
(default) timeout occurs, returning it to Auto Cycle.
MANUAL CYCLE AND HOLD: The display will manually advance the flowchart
screens by pushing the meter display button multiple times. The display screen will
remain in its last displayed mode, updating values continuously.
To Next Page
Loading...
