DO NOT make changes on this ViewPoint screen.
Doing so may make the MD-P1 or MD-P1D Power Meter inoperable. Contact
Siemens Technical Support for assistance before making meter register adjustments.
Verifying Installation with ViewPoint Software
In addition to verifying your connections with the PhaseChek LEDs on the front of the
meter, you can use the ViewPoint software to check connections. Any computer
running ViewPoint software can display information about the meter's real–time values
for local verification of operation.
Real-Time Values Screen
Click on the Real-Time Values tab at the top of the ViewPoint screen to display
current measured values.
To Next Page
Loading...
