Siemens MD-P1 - Meter Anatomy; Safety Summary and Specifications

Introduction
Meter Anatomy
8
Siemens Industry, Inc.
125-201
09/30/2019
Meter Anatomy
Figure 3: MD-P1D Power Meter with Display
Safety Summary and Specifications
This general safety information must be used by both the Logger operator and
servicing personnel. Siemens Industry, Inc. assumes no liability for user’s failure to
comply with these safety guidelines.
The MD-BMS and MD-BMED Power Meters are Over-Voltage Category III devices.
Use approved rubber gloves with mechanical protection and goggles when operating
these devices.
Conforms to UL Std 61010-1
and IEC61010-2-030
Certified to CSA Std C22.2 No. 61010-1