Siemens MD-P1 - Firmware Update Screen

Appendices
Appendix E - Installing Firmware Updates for the MD-P1 and MD-P1D Power Meter
55
Siemens Industry, Inc.
125-201
09/30/2019
When the update completes, ViewPoint displays a message window confirming a
successful update.
Comms Setup Screen
This ViewPoint screen is designed for use with MD-BM BACnet/Modbus style power
meters and is not applicable for the MD-P1 of MD-P1D Power Meter. It is strongly
recommended not to use this screen for these power meters.