Siemens MD-P1 - Connecting to the Meter

Appendices
Appendix D - Monitoring and Servicing the MD-P1 and MD-P1D Model Power Meters
49
Siemens Industry, Inc.
125-201
09/30/2019
3. Click the Connect button at the lower right corner of the screen.
 The meter’s key data is uploaded into the ViewPoint Service Software Tool,
and displays the connected meter’s data on this screen including:
 Model Number
 Meter Serial Number
 Meter Firmware Revision
 The status box contains information confirming valid connection to the meter.