Siemens MD-P1 - Page 53

Appendices
Appendix D - Monitoring and Servicing the MD-P1 and MD-P1D Model Power Meters
53
Siemens Industry, Inc.
125-201
09/30/2019
CAUTION
DO NOT attempt to change CT values from this screen.
CT values can only be updated by using the Siemens WCIS Programming Tool to
modify the MD-P1 Model Power Meter application number.
CAUTION
DO NOT CHANGE ANY VALUES IN THESE CT REGISTERS.
Updating CT values using ViewPoint software can make the power meter inoperable.