Siemens MD-P1 - Page 58

Appendices
58
Siemens Industry, Inc.
125-201
09/30/2019
This Real-Time Values data is for data monitoring and verification only.
Read/Write Registers Screen
This ViewPoint screen is designed for use with MD-BMS BACnet/Modbus style meters,
and is not applicable for MD-P1 or MD-P1D Power Meters. It is strongly recommended
that you do not use these screens for these meters.
CAUTION
DO NOT make changes on this ViewPoint screen.
Doing so may make the MD-P1 or MD-P1D Power Meter inoperable. Contact
Siemens Technical Support for assistance before making meter register adjustments.