ECO REFERENCE MANUAL
11-12
EG
EXAMPLE 11
DIRECT-ON-LINE BYPASS
Switch between inverter control and direct-on-line starting.
All settings based on factory settings with the following exceptions:
PARAMETER CHANGES FROM FACTORY DEFAULTS
SETTING DESCRIPTION
P006 = 1 SELECT ANALOGUE/POTENTIOMETER SETPOINT
P007 = 0 SELECT RUN/STOP VIA TERMINALS
P016 = 1 FLYING RESTART
ITEM DESCRIPTION
A SPEED SETTING POTENTIOMETER
1K
K1 INVERTER CONTACTOR
K2 INVERTER CONTACTOR
K3 DIRECT-ON-LINE CONTACTOR
S1 START PUSHBUTTON
S2 STOP PUSHBUTON
S3 EMERGENCY STOP PUSHBUTTON
F1-3 MAIN SUPPLY FUSES
F4 CONTROL FUSE
F5 THERMAL OVERLOAD RELAY
To Next Page
Loading...
