Siemens Midimaster Eco - Page 82

ECO REFERENCE MANUAL
12-3
EMC
Filter Part Numbers:
Inverter Model No. Class A Filter Part No. Class B Filter Part No. Standard
ECO1-75/2 6SE3290-0DA87- 0FA1 6SE3290-0DA87-0FB1 EN 55011 / EN 55022
ECO1-110/2 - ECO1-150/2 (IP20 only) 6SE3290-0DB87- 0FA3 6SE3290-0DB87-0FB3 EN 55011 / EN 55022
ECO1-220/2 - ECO1-400/2 (IP20 only) 6SE3290-0DC87- 0FA4 6SE3290-0DC87-0FB4 EN 55011 / EN 55022
ECO1-110/3 - ECO1-150/3 6SE3290-0DA87- 0FA1 6SE3290-0DA87-0FB1 EN 55011 / EN 55022
ECO1-220/3 - ECO1-300/3 (IP20 only) 6SE3290-0DB87- 0FA3 6SE3290-0DB87-0FB3 EN 55011 / EN 55022
ECO1-400/3 - ECO1-750/3 (IP20 only) 6SE3290-0DC87- 0FA4 6SE3290-0DC87-0FB4 EN 55011 / EN 55022
ECO1-110/2 - ECO1-400/2 (IP56 only) 6SE3290-0DG87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1-550/2 - ECO1-750/2 6SE3290-0DG87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1-1100/2 6SE3290-0DH87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1-1500/2 - ECO1-2200/2 6SE3290-0DJ87- 0FA6 6SE2100-1FC21 EN 55011 / EN 55022
ECO1-3000/2 - ECO1-4500/2 6SE3290-0DK87- 0FA7 6SE3290-0DK87- 0FB7 EN 55011 / EN 55022
ECO1-300/3 - ECO1-1500/3 (IP56 only) 6SE3290-0DG87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1- 1100/3 - ECO1-1500/3 6SE3290-0DG87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1-1850/3 - ECO1-2200/3 6SE3290-0DH87- 0FA5 6SE2100-1FC20 EN 55011 / EN 55022
ECO1-3000/3 - ECO1-3700/3 6SE3290-0DJ87- 0FA6 6SE2100-1FC21 EN 55011 / EN 55022
ECO1-4500/3 6SE3290-0DJ87- 0FA6 6SE3290-0DK87- 0FB7 EN 55011 / EN 55022
ECO1-5500/3 - ECO1-9000/3 6SE3290-0DK87- 0FA7 6SE3290-0DK87- 0FB7 EN 55011 / EN 55022
ECO1-110K/3 - ECO1-160K/3 6SE7033-2ES87-0FA1 Not available EN 55011 / EN 55022
ECO1-200K/3 – ECO1-315K/3 6SE7036-0ES87-0FA1 Not available EN 55011 / EN 55022
Maximum mains supply voltage when filters are fitted is :
•
480V for MICROMASTER Eco.
•
460V for MIDIMASTER Eco.
Three classes of EMC performance are available.
These levels of performance are
only achieved when using the
default switching frequency (or
less) and a maximum screened
motor cable length of 25 m.
Compliance with the EMC Product Standard for
Power Drive Systems EN 61800-3 for use in
Second Environment (Industrial) and
Restricted Distribution.