Siemens Multi Panel MP270 SIMATIC HMI User Manual

System Settings
6-4
MP270 Equipment Manual
Release 01/99
6.3 Screen Settings
Purpose
In order to be able to view the MP270 screen well, even with changing lighting
conditions, the brightness can be adjusted during operation and, when using units
with an STN display, the screen contrast can also be adjusted.
Set brightness
The screen brightness can be adjusted by means of the following key
combinations:
Increases the brightness.
Reduces the brightness.
Set contrast
The screen contrast can be adjusted by means of the following key combinations:
Increases the contrast.
Reduces the contrast.
Note
In the case of units with TFT displays, the screen contrast is fixed.
Save settings
The MP270 saves the current settings, which are backed up should a power failure
occur, and sets them automatically when the unit is switched on again.

Siemens Multi Panel MP270 SIMATIC HMI Specifications

General

Brand	Siemens
Model	Multi Panel MP270 SIMATIC HMI
Category	Control Panel
Language	English