Options
9-2
MP270 Equipment Manual
Release 01/99
9.1 Memory Cards
Purpose
Alternative PC cards (storage media) can be inserted in expansion slot
Slot A
(Figure 9-1) located on the rear side of the unit. This enables, for example,
archiving important process data.
Slot A
(1)
Figure 9-1 Position of the memory card slots
Cards supported
The MP270 supports the use of all standard cards which operate with a
programming voltage of 5 V (types I and II):
ATA Flash disk
Linear Flash cards complying with the FTL standard
SRAM cards
To Next Page
Loading...
