Installation
7-7
MP270 Equipment Manual
Release 01/99
7.2.1 Connect configuration computer
Connection configuration
Figure 7-2 illustrates how a configuration computer (PU or PC) is temporarily
connected to the MP270 interface IF2 in order to download the runtime software
ProTool/Pro RT and configuration data. Standard cables are available for the
connections shown (refer to the ST80 catalog).
RS232
RS232
RS232
COM1/2
(25-pin)
COM1
(25-pin)
COM2
(9-pin)
IF2
PC
PG 7xx
MP270
RS232
COM1/2
(9-pin)
Figure 7-2 Connection configuration diagram for configuration computer
To Next Page
Loading...
