Unit Description
8-7
MP270 Equipment Manual
Release 01/99
Create labeling strips
Only use transparent foil to create your own labeling strips so that the LEDs in the
function keys remain visible. Label the foil either with a printer or a waterproof
felt-tip pen. Cut the strips according to the specifications depicted in Figure 8-4 .
Details:
13.1
6.3
16.5
18.5
18.5
32.5
55.7
9.3
79
102.2
125.5
31.5
53.7
9.3
86
242
(2x)
(8x)
LED window, transparent
Figure 8-4 Labeling strip dimensions
File
The configuration software ProTool contains formatted patterns for labeling
function keys individually for various operating units. The patterns are stored on
the Installation CD in \UTILITY\SLIDExx.DOC in Word format.
This enables labeling strips to be created for the MP270 for specific systems
without extensive design and printing operations.
To Next Page
Loading...
