6.4.3 NW8202 installation
You can install the NW8202 tool when you install the DMS8000 system. You can
also install it separately on a different PC (such as a service PC) at a later time.
On a DMS8000 system, you launch NW8202 by selecting the NW8202.exe file
from the following directory:
<InstallationDir> > Utilities > NW8202
The default installation folder is: C:\Program files\DMS8000 (assuming an English
version of Windows).
To install the NW8202 tool on a service PC, do the following:
1. Logon to computer as Administrator (for details, contact the network
administrator).
2. Insert the DMS8000 DVD.
3. Select the Support Tools option.
4. Select Install NW8202.exe.
The Install Shield Wizard screen opens.
5. Follow the instructions in the installation wizard.
6.5 NW8204 diagnostic tool
The NW8204 is a powerful diagnostic tool, which provides functionalities for the
following features:
⚫ Use of the available diagnostic files
⚫ Use of the network log files
Note: Part of the NW8204 tool is available in Composer (limited functionality).
For details, see the
Network Connectivity Guide
(document no.A6V10359485).
Note: A similar maintenance and diagnostic tool is available on the Web. Note
that the Web server tool is available only if the NS8210 driver is installed.
For details see The NK8000 Web Server tool [➙ 74].
6.5.1 NW8204 hardware requirements
⚫ Pentium-class PC hardware or higher
⚫ Ethernet network interface adapter (IEEE 802.3, 10Base-T or 100Base-TX)
⚫ 10 MB Free Disk Space
⚫ 128 MB RAM (recommended)
6.5.2 NW8204 software requirements
⚫ Windows 7 or higher operating system
⚫ Network Configuration including TCP/IP protocol
6.5.3 NW8204 installation
You can install the NW8204 tool when you install the DMS8000 system. You can
also install it separately on a different PC (such as a service PC) at a later time.
To Next Page
Loading...
